Die-cast aluminium body (minimum EN 47100 with low copper content and high resistance to atmospheric agents) with stainless steel external screws, IP66 ingress protection with removable anti-aging rubber gaskets and a Teflon pressure compensation filter to reduce internal condensation. Silver (RAL9006) coloured polyester powdercoat finish resistant to UV rays according to ASTM D4587:2011 standard and to corrosion according to EN ISO 9227:2017 salt spray tests with a >3000hr test duration.
Anti-closing mechanism avoids accidental closure during assembly and maintenance. ELECTRA 1: 4.5kg, Maximum wind-exposed surface (at 0° tilt): 0.020m². ELECTRA 2: 5.2kg, Maximum wind-exposed surface (at 0° tilt): 0.022m². ELECTRA 3: 6.0kg, Maximum wind-exposed surface (at 0° tilt): 0.025m².
Rotatable mount accepts Ø46-60mm OD pole top or side entry spigots. Pole top version configurable from 0° to 20° tilt. Side entry version configurable from 0° to -20° tilt relative to bracket to absorb arm upcast for horizontal cutoff.

4mm thick extra-clear tempered safety glass, IK09 impact resistant. Six LED arrays optimised for various road, path, and area requirements.

220-240V 50/60Hz integrated, replaceable electronic DALI 2 dimmable driver with thermal protection, programmable for various intelligent control options including Constant Light Output (CLO). Top and bottom castings may each be fitted upon request with a Zhaga Book 18 Ed.3 socket to accept a range of control accessories (Driver will be upgraded to D4i type).
Class II wiring, up to 10kV common mode, differential mode 6kV.

Wattage: 7W - 60W

High quality, LED modules in 3000K and 4000K as standard, CRI Ra70 (other LED colour characteristics available to project request - see your local Versalux representative for details). L90 @ 90,000hr+ for Ta=55°C, 100,000hr+ for Ta40°.

Lumen output: 1100lm - 10,000lms